Light , Sound and Speed Controller SFR-1 with USB

Calculate Shipping

The SFR-1 is a multifunctional module and combines the sound module USM-RC-2 and the
speed controller UFR-1230 in one unit. It comes with a large light control unit, three servo outputs and an infrared port for the light module SM-IR-16-2, to transmit light signals to a trailer.

The SFR-1 is suitable for all types of RC standard transmitter. With the various setting options the SFR-1 can be easily adjusted to all model requirements and driving behaviours. For an easy start we have more than 140 ready to use sound projects and 700 sound files for various model types. Of course, own recordings can be used, as well.

For Starter Pack Includes

1 x SFR-1 with USB

1 x Loudspeaker LS-8R-8W-37

1 x Loudspeaker box to fit LS-8R-8W-37

1 x Bag of 10x3mm Pre Wired LED's

1 x Bag of 8x5mm Pre Wired LED's

1 x K-USB-2 Cable

Some components may need to be ordered to please allow time for shipping

(SFR-1)

Sound functions:
For an authentic sound of the model, sounds can be selected for following areas:
Driving and engine sounds for one motor (speed-dependent)
Additional sounds (e.g. horns, hydraulic and compressed air noises)
Random sounds (e.g. squeaking, animal and ambient sounds)

Driving functions:
One brushed and bell-armature motors (DC) can be controlled smooth and realistic with the SFR-1. An ideal driving behavior can be achieved through a large number of settings.

The speed controller on the SFR-1 has following characteristics:
Cruise control functions
Different brake functions (with hand- and emergency brake)
Adjustable load regulation
Adjustable mass inertia
Steering inertia (with adjustable steering ankle limits)
Adjustment of throttle curve for different driving behaviors

Light functions:
To realize different light effects, the SFR-1 has 16 switching outputs to connect LEDs, lamps, smoke generators and other consumers. Light functions, such as low beam, rear light, brake light, indicator lights, warning lights, flickering lights, etc. can be easily implemented and controlled.

All light functions can be activated or deactivated manually with a proportional channel or with nautic/multiswitche modules and automatically by sounds and movements.

The SFR-1 has a special infrared port to connect the IR transmitter diode for the light module SM-IR-16-2.

Servo movements:
With two additional servo outputs, movements can be synchronised to the played sound

Supply voltage (U_b):	6 – 18 V DC
Power consumption:	Quiescent current: approx. 1 mA Standby current (sound, motor and outputs off): approx. 80 mA
Motor current:	max. 30 A continuous current, 60 A short time (1 minute)
BEC voltage:	5,6 V
BEC current:	max. 3 A continuous current, 5 A short time (10 seconds)
Proportional inputs:	6 channels (1,000 - 2,000 ms) Supported protocols: PPM / PCM (1,000 - 2,000 ms) Sum signal S-Bus (max. 16 channels) Sum signal SUMD (max. 16 channels) Nautic / Multiswitch / Multikanal / EMS
Servo outputs:	3 outputs (1,000 - 2,000 ms) Servo output for steering Servo output 1 Servo output 2
Switching outputs:	16 outputs (npn – open collector), max. 1,5 A per output, the total current of all outputs is not allowed to exceed 3,0A
NF amplifier:	20 W
Loudspeaker:	4 - 8 Ohm
Volume setting:	With extra poti (100 kOhm) and/or by the radio
Memory for sound files:	Micro-SD-card (1 bis 32 GB)
May. length of sound:	approx. 180 minutes per1 GB
Supported sound files:	WAV-format, 8/16 Bit, Mono/Stereo, 22/44 kHz
Sound output:	16 Bit, Mono, 44 kHz
Number of possible sounds:	5 running steps/gears (internally in up to 255 steps accelerated) 8 change sounds between the running steps/gears Turn on noise, turn off noise, starting noise, stopping noise, idling noise, brake noise, reverse engine noise, curve squeal, flashing lights sound 30 additional sounds (for example via prop.-channels) 8 random sounds (random generator) 30 tracks for WAV-Player
Random sound generator:	Times between 1 to 999s adjustable
Additional ports:	Programming interface for data cable Port for infrared diode of light module SM-IR-16-2
Protection features:	Short circuit protection at motor output stage Short circuit protection at switching outputs Short circuit protection at BEC Temperature monitoring Battery voltage monitoring Protection while switching on power supply Failsafe for proportional inputs
Cables for connection:	For battery: 2 x 1,5 mm², length approx. 15 cm (with Deans T female connector) For Motor: 2 x 1,5 mm², length approx. 15 cm For receiver: servo patch 3 x 0,14 mm², length approx. 30 cm
Permissible ambient temperature:	0 – 60° C
Permissible relative air humidity:	Max. 85 %
Size:	80 x 47 x 23 mm
Weight:	86 g

SKU	SFR-1
Brand	Beier
Shipping Weight	0.0860kg

Best truck controller

4 June 2022
This is an awesome bit of kit that is totally programmable. Paired with a carson controller and the beier adapter it becomes an easy unit to use. It comes with a heap of included sounds for most truck models and you can even add your own sounds into it. Also on the plus side it can do a lot more than the tamiya units and at less than half the size is easily hidden away. Highly recommend this unit over other controllers.

(5)