FCM HAMMAR 160 S 1:14-2 sideloader

The latest thing for experienced model constructors with a passion for rolling stock on a scale of 1:14

A totally unique and true-to-nature model of the original sideloader

The design of the FCM HAMMAR 160 S 1:14-2 sideloader is a true-to-nature model of the original sideloader.

We have had the pleasure of cooperating with Hammar Maskin AB on the development of the sideloader, and the model is approved by 

Suitable for trucks, trailers and construction vehicles, and has specially modified dumpers on a scale of 1:14.

The FCM HAMMAR 160 S 1:14-2 sideloader is suitable for trucks, trailers and dumpers on a scale of 1:14.

The various plate parts of the construction kit are produced from MS63 brass, so that the material itself is protected from corrosion while the plate items can either be glued or soldered together.

The hydraulics system shall be constructed with a suitable pump, return filter, valve blocks and, if applicable, load-holding valves. A principal hydraulics diagram is enclosed with the assembly instructions in the construction set.

Note that without the load-holding valves, the containers cannot be held in a given raised position.

Technical data

• The construction kit contains 2 pcs. FCM HAMMAR 160 S 1:14-2 side loaders
• Dimension in mm.: H/192 x W/178 x D/37 mm.
• Weight per side loader without oil is approx. 900 g.
• The construction kit contains hydraulic fittings and hoses from the valve blocks as far as/back to the side loaders
• The model is designed for a working pressure of 12 bar.
• The lifting capacity of each side loader is 2,700 g.
• The model can be glued or tin soldered.
• Hydraulics Sold Separately

• The hydraulics system shall be constructed with a suitable pump, return filter, valve blocks and, if applicable, load-holding valves. A principal hydraulics diagram is enclosed with the assembly instructions in the construction set.

   

  Note that without the load-holding valves, the containers cannot be held in a given raised position.